Invacare Rea Comfort Assembly Instructions Manual page 38

1.
G
D
E
Tools: 5 mm Allen Key
13 mm fi xed spanner
Circlip pliers
38
E
F
Manual tilting of the backrest
and seat
First, remove the seat cushion, seat-base and footrests.
Lay the chair on its backrest, so that the piston can
be fi tted from the front.
1. Angle the piston downward into the correct
position - see table. Position the spacer (D)
between the gas piston and the attachment. Insert
the screw (F) and washers (E) through the gas
piston and the attachment. Tighten nut (G).
REA ASSIST