Invacare Rea Comfort Assembly Instructions Manual page 17

4.
C
B
5.
B
REA COMFORT
A
A
4. Then secure the seat stop (A) in the predrilled
holes in the seat by tightening the screws (B).
It is important that the seat stop is placed as
shown in the picture so that the cross tube
(transverse tube) (C) is used as a stop.
5. To adjust the sliding seat, move the lever (A)
upwards at the same time as you pull the handle
(B) and move the seat either backwards or
forwards. It is easier to adjust the seat when the
user is sitting in the wheelchair.
17