All Group Scang - Motorola HT1250-LS+ User Manual

The G symbol appears on the display
•
when non-prioritized Auto Group Scan has
been activated.
The H symbol appears on the display
•
when prioritized Auto Group Scan has
been activated.
• There is no LED indicator during Auto
Group Scan.
To Stop Auto Group Scan
Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.
ALL GROUP SCAN
(LTR TRUNKED OPERATION ONLY)
All Group Scan scans all talkgroups within the
selected LTR trunked zone.
When All Group Scan is enabled:
The G symbol appears on the display.
•
• The LED indicator blinks green during All
Group Scan operation; it stops blinking
when the radio switches to an active talk-
group.
68
English
Note:
To Start or Stop All Group Scan Operation
through a Preprogrammed Button (see
page 16)
•
•
–or–
To Start or Stop All Group Scan Operation
through the Menu
G
1
2
3
4
5
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
Press the preprogrammed All Group Scan
button once to start All Group Scan.
Press the preprogrammed All Group Scan
button again to stop All Group Scan.
)
to enter menu mode.
$OO *URXS 6FDQ
+ ?
or until
$OO *URXS 6FDQ
)
to select
You see the current scan status.
$OO *URXS 2Q"
+ ?
or until
$OO *URXS 2II"
–or–
)
to confirm your selection.