Deleting A Nuisance Channel/Talkgroup; Editing A Scan List - Motorola HT1250-LS+ User Manual

DELETING A NUISANCE CHANNEL/
TALKGROUP
(PASSPORT GROUP SCAN OR SYSTEM SCAN
OPERATION ONLY)
If a talkgroup or channel continually generates
unwanted calls (a "nuisance" channel), use the
preprogrammed Scan button to temporarily
delete the talkgroup or channel from the Scan
list.
To Temporarily Delete the Channel/
Talkgroup
1 While the radio's receiving activity is on the
nuisance channel, press and hold the Scan
button until you hear a high-pitched tone
(valid key press).
2 Release the Scan button. The nuisance
channel has been temporarily deleted from
your Scan list.
Note:
70
English
In PassPort mode, you cannot delete
a priority channel/talkgroup (see
page 72), or the currently selected
talkgroup in a Scan list.
Restoring a Channel/Talkgroup Back to the
Scan List
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
Note: In PassPort mode, the talkgroup can also
be restored by scrolling through the list, or
switching the current selected talkgroup or
zone.

EDITING A SCAN LIST

(PASSPORT GROUP SCAN OR SYSTEM SCAN
OPERATION ONLY)
One Scan list is assigned to each of the 16
positions on the Zone Selector knob. Each
Scan list can contain up to 16 talkgroups and/
or channels. The same talkgroup or channel
can be included in several Scan lists, and the
same Scan list can be assigned to several
Zone Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.