REPEATER OR TALKAROUND J
MODE
(CONVENTIONAL OPERATION ONLY)
Talkaround mode enables you to communicate
with another radio when either:
•
The repeater is not operating
–or–
•
Your radio is out of the repeater's range but
within communicating distance of another
radio.
Note: The J symbol appears on the display
To Select Repeater Mode or Talkaround
Mode
Press the preprogrammed Repeater/
Talkaround button (see page 16) to toggle
between repeater mode and talkaround mode.
–or–
)
1
+
2
)
3
32
English
when talkaround mode is selected.
to enter menu mode.
?
5SWU7DONDUQG
or
until
5SWU7DONDUQG
to select
+
?
4
or
until
–or– until
)
5
to confirm your selection.
CALL LIGHT
(TRUNKED OPERATION ONLY)
The Call Light indicator informs you that you
have received a call from a specified talkgroup
(as programmed by your dealer). The yellow
LED indicator will flash continuously, indicating
that a trunked call has been received.
To Turn the Call Light Off
•
Press the PTT button.
•
Select another trunked or conventional
zone.
•
Press any preprogrammed button.
•
Turn the radio off, then on again.
5SWU7DONDUQG
7DONDUQG 0RGH