Transmit A Conventional Call; Call Light (Trunked Operation Only); Repeater Or Talkaround Jmode - Motorola CP200XLS User Manual

TRANSMIT A CONVENTIONAL
CALL
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
Note:
3 Hold the radio vertically 1 to 2 inches (2.5 to
5cm) from your mouth. Press the PTT button
to talk.
•
4 Release the PTT to listen.
24
English
Monitor for traffic before transmitting to
ensure that you do not "talk over"
someone who is already transmitting
The LED indicator lights steady red while
the call is being sent.
CALL LIGHT
(TRUNKED OPERATION ONLY)
The Call Light indicator informs you that you
have received a call from a specified LTR
talkgroup (as programmed by your dealer).
The yellow LED indicator will blink
continuously, indicating that a call has been
received.
To turn the call light OFF:
• turn the radio OFF, then ON again, or
• change the channel/talkgroup, or
• press the PTT button, or
• press any valid button.
REPEATER OR TALKAROUND J
MODE
Talkaround Mode enables you to communicate
with another radio when either:
• The repeater is not operating.
–or–
• Your radio is out of the repeater's range but
within communicating distance of another radio.
®