Setting Specific Functions Using Shortcuts (Function Menu); Buttons And Knobs Used For Function Menu Operations; Operation Using Iris, Gain, And Shutter Buttons - Sony RM-IP500 Operating Instructions Manual

Setting Specific
Functions using
Shortcuts (FUNCTION
Menu)
When the IRIS, GAIN, SHUTTER, ASSIGN 4,
ASSIGN 5, or ASSIGN 6 button is pressed on the menu
control block, the setup item and setting of the function
assigned to the button is displayed on the LCD panel.
You can change the setting using the VALUE knob.
This allows you to set some functions more quickly than
by using normal menu operations.
Notes
• Depending on the camera model, the settings
displayed on the unit and camera menu display may
not be the same. In this case, the settings displayed in
the camera menu are the actual settings.
• When changing a setting, there may be some delay
before the display is updated.
Buttons and knobs used for
FUNCTION menu operations
Operation Buttons and knobs used
Activate Press the IRIS, GAIN, SHUTTER, or
FUNCTION ASSIGN 4 to ASSIGN 6 button.
menu mode.
Change the Turn the VALUE knob. Confirmation of
setting of the changed settings is not required.
setup menu sub
item.
Save settings. Saved on the camera using the camera preset
memory function.*
* For details about items saved with a preset number, refer to
the operating instructions of each camera.
Operation using IRIS, GAIN, and
SHUTTER buttons
1
Set CONFIG >RM SETUP >AE CONFIG to
MANUAL, IRIS Pri, GAIN Pri, or SHUTTER Pri
in the RM menu.
For details about AE CONFIG, see "AE CONFIG"
(page 46).
2
Press the AE button, turning it off (button is not lit).
The IRIS, GAIN, or SHUTTER button operation
which is enabled (lit blue) is determined by the AE
CONFIG setting.
3
Press the IRIS, GAIN, or SHUTTER button.
The button is lit yellow, and the adjustment item
and setting are displayed on the LCD panel.
4
Set the value using the VALUE knob.
Note
If an adjustment is not supported, "---" is displayed for
the adjustment value.
IRIS button
Sets the iris value of the camera.
GAIN button
Sets the gain value of the camera.
SHUTTER button
Sets the shutter speed of the target camera.
The settings display varies depending on the frame rate
setting (59.94 Hz or 50 Hz).
For details about the frame rate setting, see "CAMERA
FREQ" (page 46).
37
4
3