Sony RM-IP500 Operating Instructions Manual page 36

1
Select the target camera to control.
For details about selection, see "Selecting a
Camera" (page 27).
2
Press and hold the CAM MENU button, turning it
on (button is lit yellow).
Camera menu operation mode is activated.
The camera setup menu is displayed on the output
video monitor for the camera on-screen display.
3
Operate the camera setup menu using the SELECT
knob/button, VALUE knob, CANCEL button, and
joystick.
SELECT knob
Selects menu items.
The cursor moves up/down as the SELECT knob is
turned counterclockwise/clockwise.
SELECT button
Press this button to confirm the selection of menu
items.
If a menu item has sub items, those sub items are
displayed.
VALUE knob
Selects settings.
The setting changes as the VALUE knob is turned
counterclockwise/clockwise.
CANCEL button
Press this button to go back one level in the menu
and to exit the setup menu.
Note
On the SRG-360SHE, pressing the CANCEL
button during menu operation will exit menu mode.
To go up one level in the menu, press and hold the
CAM MENU button.
Operation using the joystick
Select a setup menu item using tilt operation, and
select the setting using pan operation.
3
4
2
36
Press the joystick button to confirm the selection of
items and settings.
Exit camera setup menu mode.
Press the CANCEL button repeatedly until the
menu disappears.