Typical RM menu operation
1
Press the RM MENU button, turning it on (button
is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor to the
desired item to set.
The cursor moves up/down as the SELECT knob is
turned.
Cursor
3
Press the SELECT button.
The menu for the selected item appears.
4
Turn the SELECT knob to move the cursor to the
desired setup menu item.
The cursor moves up/down as the SELECT knob is
turned.
Cursor
5
Press the SELECT button.
The selected menu item and its setup items appear.
6
Turn the SELECT knob to move the cursor to the
desired item.
The cursor moves up/down as the SELECT knob is
turned.
7
Turn the VALUE knob to select the setting.
2~7
1
Cursor
To configure items in other menus
Press the CANCEL button to return to the parent item in
the menu, and then use the same procedure.
To save a setting in the unit
Press the VALUE button after adjusting the setting.
13
Selected setting