Sony RM-IP500 Operating Instructions Manual page 15

The LAN menu appears.
The MAC address is displayed at the bottom.
5
Turn the SELECT knob to move the cursor to IP.
6
Set the IP address using the SELECT knob and
VALUE knob/button.
The default setting is 192.168.0.10.
1 Turn the SELECT knob clockwise to move the
cursor to the first three digits (for example,
192).
IP:p192. 168. 0. 10
2 Turn the VALUE knob to set the value.
Turning clockwise increases the value, and
turning counterclockwise decreases the value.
3 Turn the SELECT knob to move to the next
number and repeat step 2 to set the other
numbers.
7
Set SM (subnet mask) and GW (default gateway
address) in the same way as described in steps 5 and
6.
8
When finished making all settings, move the cursor
to APPLY.
9
Turn the VALUE knob to change NOT EXEC to
EXEC, then press the VALUE button.
The following message appears, prompting you to
reboot the unit.
10
Turn the SELECT knob to move the cursor to
CONFIRM.
11
Turn the VALUE knob to change NO to YES, then
press the VALUE button.
The unit reboots automatically.
Upon rebooting, the IP address setting is
completed.
15