Setting A Component Code By The Search Function - Sony RM-VL700 Operating Instructions (primary manual) Operating Instructions Manual

Setting a component
code by the Search
function
You can find a code number
available for a component that
doesn't have one in the supplied
"Component Code Numbers".
Before starting the Search
function
Set each component to the
following status so that the Search
function works effectively.
TV: Power-on
VCR, CBL/SAT, DVD, AMP:
Power-off
CD player*, MD player*, cassette
deck*: Power-on with a playback
source (disc, cassette tape, etc.)
* If any of these components are
assigned to any of the Component
Select buttons (page 27), you can
set a component code using the
Search function.
1
Press SET.
All Component Select buttons
flash.
2
Press the Component Select
button for the desired
component.
The selected Component
button lights up, and all other
buttons turn off.
3
Press CH + or CH – and
POWER in turn until the
component reacts as
described in the following.
TV: Powers off
VCR, CBL/SAT, DVD, AMP:
Powers on
CD player, MD player, cassette
deck: Plays back
Press CH + to go to the next
code number.
Press CH – to go back to the
previous code number.
The Component button flashes
three times after the numbers
have turned one cycle.
Continued
11