Alcatel 7750 SR-12 Installation Manual page 64

Installing Impeller Trays
To install impeller trays:
Step 1
Step 2
Step 3
Step 4
Page 62
Remove the impeller trays from the protective packaging.
Install the first impeller tray in the right-most slot. Gripping the handle, orient the tray
so the connector is on the top-right rear side. Slide the connector end into the slot until
it is fully seated. Tighten the captive screws.
Install second impeller tray in the middle slot.
Install third impeller tray in the left-most slot.
7750 SR-12