Installing Ioms; Warnings And Notes; Installing The Ioms And Mdas - Alcatel 7750 SR-12 Installation Manual

I IOM
NSTALLING
W
ARNINGS AND
Warning:
• Electrostatic discharge (ESD) damage can occur if IOMs, SF/CPMs, or MDAs are mishandled.
Always wear an ESD-preventive wrist or ankle strap and always connect an ESD strap to the
grounding plug on the front of the chassis.
• Always place router components on an anti-static surface.
• Blank panels and faceplates are required in all empty card and component slots to prevent excess
dust accumulation and to help control airflow and electromagnetic interference. Faceplate blanks
do not have board components or connector pins.
Notes:
General:
• Card, MDA, and port information can be configured prior to the component installation.
• IOMs do not have LEDs.
• Do not force an IOM into a SF/CPM slot.
• Do not force a SF/CPM into an IOM slot.
7750 SR-12:
• The 7750 SR-12 card slots are vertically oriented.
• IOMs are is designed to fit in slots 1 through 10.
7750 SR-12
S
N
OTES

Installing the IOMs and MDAs

Page 103