Ejecting Flash Cards - Alcatel 7750 SR-12 Installation Manual

E F
JECTING LASH
To eject the slot #3 flash card:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
To eject the slot #1 or slot #2 flash cards:
Step 1
Step 2
Step 3
7750 SR-12
C
ARDS
The command MUST be issued prior to removing a flash card.
shutdown
Command
file shutdown cflash-id
Loosen the compact flash slot locking screw.
Lift the slot cover.
The ejector button for Compact Flash Slot #3 is slightly recessed. Insert a small object
such as a pen tip to depress the button. The card will partially pop out of the slot.
Remove the card and place it in an anti-static bag.
The flash card containing the boot and configuration files must be installed in Compact
Flash Slot #3 ( ) on the SF/CPM card.
cf3:
Lower the slot cover and tighten the locking screw.
The command MUST be issued prior to removing a flash card.
shutdown
Command
file>shutdown cflash-id
file>shutdown cflash-id
Press the ejector button on compact flash slot #1 or compact flash slot #2. The card will
partially pop out of the slot.
Remove the card and place it in an anti-static bag.
Installing the SF/CPM
Example
file shutdown cf3:
Example
file shutdown cf1:
file shutdown cf2:
Page 97