C
MDA P
ONFIGURING
MDA information must be must be configured before ports can be configured.
After the IOM is configured, use the following CLI commands to provision the MDA(s). A
maximum of two MDAs can be configured on an IOM.
In the
MDAs:
Step 1
Step 2
Step 3
To provision an additional MDA, continue the configuration process with Step 5:
Step 4
Step 5
Step 6
E
XAMPLE
The following example displays card slot, card type, MDA slot, and MDA type command usage:
SR12>config# card 1
SR12>config>card# card-type iom-20g
SR12>config>card# mda 1
SR12>config>card>mda# mda-type m10-1gb-sfp
SR12>config>card>mda# exit
SR12>config>card# mda 2
SR12>config>card>mda# mda-type m20-100eth-sfp
SR12>config>card>mda# exit
7750 SR-12
ARAMETERS
context, use the following CLI commands and syntax examples to provision the
config>card
Command
mda mda-number
mda-type mda-type
exit
mda mda-number
mda-type mda-type
exit
Installing the IOMs and MDAs
Example
mda 1
mda-type m60-10/100eth-tx
exit
mda 2
mda-type m10-1gb-sfp
exit
Page 101