Yamaha XP530E-A Owner's Manual page 84

Periodic maintenance and adjustment
1
1
2
3
1. Oil filter wrench
2. Oil filter cartridge
4
TIP
An oil filter wrench is available at a
Yamaha dealer.
5
7. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
6
cartridge.
7
8
9
1. O-ring
10
TIP
Make sure that the O-ring is properly
11
seated.
8. Install the new oil filter cartridge,
and then tighten it to the specified
12
torque with a torque wrench.
13
14
2
1. Torque wrench
9. Install the engine oil drain bolt and
1
10. Check the O-ring for damage and
1. Engine oil filler cap
2. O-ring
11. Refill with the specified amount of
8-12
1
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 12 lb·ft)
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 31 lb·ft)
replace it if necessary.
the recommended engine oil, and
then install and tighten the oil filler
cap.
1
2