Yamaha XP530E-A Owner's Manual page 46

Instrument and control functions
1
2
3
4. Use the select switch to highlight
"Mid" or "Low", and then change
the setting using the same proce-
4
dure that was used for the high set-
ting.
5. When you finished changing the
5
settings, use the select switch to
highlight "
"MENU" switch to return to the set-
6
ting mode menu.
Traction control system settings
7
1. Use the select switch to highlight
"Traction Control".
8
9
10
11
2. Push the "MENU" switch. The trac-
tion control system setting display
12
will be shown and "ON" will flash in
the display.
13
14
", and then push the
3. To set the traction control system
to "OFF", push the select switch
" " side for 2 seconds.
4. To set the traction control system
to "ON" again, push the select
switch "
ond.
TIP
When the vehicle is powered on, the
traction cotrol sytem is set to "ON".
5. When you finished changing the
settings, push the "MENU" switch
to return to the setting mode menu.
Resetting the maintenance counters
1. Use the select switch to highlight
"Maintenance".
5-13
" for at least one sec-