Yamaha XP530E-A Owner's Manual page 40

Instrument and control functions
indicator "V-Belt" must be reset after
the V-belt change for the next periodic
V-belt change to be indicated at the
correct time.
1
Oil change indicator "Oil"
2
3
4
5
1. Oil change indicator "Oil"
This indicator flashes at the initial 1000
6
km (600 mi), then at 5000 km (3000 mi)
and every 5000 km (3000 mi) thereafter
to indicate that the engine oil should be
7
changed.
After changing the engine oil, reset the
oil change indicator. To reset the oil
8
change indicator, see page 5-11.
If the engine oil is changed before the
oil change indicator "Oil" flashes (i.e.
9
before the periodic oil change interval
has been reached), the indicator "Oil"
must be reset after the oil change for
10
the next periodic oil change to be indi-
cated at the correct time.
11
12
13
14
Function display
Push the "MENU" switch for one sec-
1
ond to switch the display between the
windshield adjusting function, grip
warmer adjusting function, seat heater
adjusting function, and information dis-
play selection function.
TIP

For XP530D-A: The windshield
adjusting function, grip warmer ad-
justing function, seat heater ad-
justing function can be selected.

For XP530E-A, XP530-A: The grip
warmer and seat heater requires
an accessory part and cannot be
selected.
Adjusting the windshield position
To move the windshield up, push the
" " side of the select switch. To move
the windshield down, push the "
side of the select switch.
Adjusting the grip warmer
This vehicle can be equipped with grip
warmers, which can only be used when
the engine is running. There are 4 grip
warmer settings.
5-7
"