Instrument and control functions
Windshield (XP530E-A,
XP530-A)
The windshield height can be changed
1
to one of two positions.
2
1
3
4
1. Windshield
5
To adjust the windshield height
1. Remove the screw access covers
6
by removing the quick fasteners.
7
8
9
1
1. Quick fastener
10
2. Screw access cover
2. Remove the windshield by remov-
11
ing the screws.
12
13
14
2
EAU77462
1
1. Screw
3. Install the windshield to the de-
sired position by installing the
screws.
1
1
1. Screw
4. Tighten the screws to the specified
torque. WARNING! A loose wind-
shield could cause an accident.
Be sure to tighten the screws to
the specified torque.
Tightening torque:
Windshield screw:
10 N·m (1.0 kgf·m, 7.2 lb·ft)
5. Place the screw access covers,
and then install the quick fasten-
ers.
5-25
1
1
[EWA15511]