Monitoring And Maintaining Msdp - Cisco 3032 Software Configuration Manual

Monitoring and Maintaining MSDP

Monitoring and Maintaining MSDP
To monitor MSDP SA messages, peers, state, or peer status, use one or more of the privileged EXEC
commands in
Table 45-1 Commands for Monitoring and Maintaining MSDP
Command
debug ip msdp [peer-address | name] [detail] [routes]
debug ip msdp resets
show ip msdp count [autonomous-system-number]
show ip msdp peer [peer-address | name]
show ip msdp sa-cache [group-address | source-address
| group-name | source-name]
[autonomous-system-number]
show ip msdp summary
To clear MSDP connections, statistics, or SA cache entries, use the privileged EXEC commands in
Table
Table 45-2 Commands for Clearing MSDP Connections, Statistics, or SA Cache Entries
Command
clear ip msdp peer peer-address | name
clear ip msdp statistics [peer-address | name]
clear ip msdp sa-cache [group-address | name]
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
45-18
Table 45-1:
45-2:
Purpose
Clears the TCP connection to the specified MSDP peer, resetting all
MSDP message counters.
Clears statistics counters for one or all the MSDP peers without resetting
the sessions.
Clears the SA cache entries for all entries, all sources for a specific group,
or all entries for a specific source/group pair.
Purpose
Debugs an MSDP activity.
Debugs MSDP peer reset reasons.
Displays the number of sources and groups originated in SA
messages from each autonomous system. The ip msdp
cache-sa-state command must be configured for this command
to produce any output.
Displays detailed information about an MSDP peer.
Displays (S,G) state learned from MSDP peers.
Displays MSDP peer status and SA message counts.
Chapter 45 Configuring MSDP
OL-12247-04