Cisco Catalyst 3750 Software Configuration Manual page 677

Chapter 28 Configuring IP Unicast Routing
Table 28-15
routing. For explanations of the display fields, refer to the Cisco IOS Apollo Domain, Banyan VINES,
DECnet, ISO CLNS and XNS Command Reference for Release 12.1, use the Cisco IOS command
reference master index, or search online.
Table 28-15 ISO CLNS and IS-IS Clear and Show Commands
Command
clear clns cache
clear clns es-neighbors
clear clns is-neighbors
clear clns neighbors
clear clns route
show clns
show clns cache
show clns es-neighbors
show clns filter-expr
show clns filter-set
show clns interface [interface-id]
show clns neighbor
show clns protocol
show clns route
show clns traffic
show ip route isis
show isis database
show isis routes
show isis spf-log
show isis topology
show route-map
trace clns destination
which-route {nsap-address | clns-name}
78-15870-01
lists the privileged EXEC commands for clearing and displaying ISO CLNS and IS-IS
Purpose
Clear and reinitialize the CLNS routing cache.
Remove end system (ES) neighbor information from the
adjacency database.
Remove intermediate system (IS) neighbor information from the
adjacency database.
Remove CLNS neighbor information from the adjacency
database.
Remove dynamically derived CLNS routing information.
Display information about the CLNS network.
Display the entries in the CLNS routing cache.
Display ES neighbor entries, including the associated areas.
Display filter expressions.
Display filter sets.
Display the CLNS-specific or ES-IS information about each
interface.
Display information about IS-IS neighbors.
List the protocol-specific information for each IS-IS or ISO IGRP
routing process in this router.
Display all the destinations to which this router knows how to
route CLNS packets.
Display information about the CLNS packets this router has seen.
Display the current state of the ISIS IP routing table.
Display the IS-IS link-state database.
Display the IS-IS Level 1 routing table.
Display a history of the shortest path first (SPF) calculations for
IS-IS.
Display a list of all connected routers in all areas.
Display all route maps configured or only the one specified.
Discover the paths taken to a specified destination by packets in
the network.
Display the routing table in which the specified CLNS destination
is found.
Catalyst 3750 Metro Switch Software Configuration Guide
Configuring ISO CLNS Routing
28-75