Displaying The Mst Configuration And Status - Cisco Catalyst 3750 Software Configuration Manual

Chapter 15 Configuring MSTP

Displaying the MST Configuration and Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 15-4 Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface.
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the command reference for this release.
78-15870-01
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
Catalyst 3750 Metro Switch Software Configuration Guide
Displaying the MST Configuration and Status
Table 15-4:
15-23