Receiver Section - Motorola MTM800 User Manual

4.1 - 2

Receiver Section

The receiver section includes the following main components:
• Antenna Switch
• AGC_0 Attenuator
• Front End Pre-selector Filter
• Low Noise Amplifier (LNA)
• AGC_1 Attenuator
• Second Pre-selector Filter
• Mixer
• IF Filter
• IF Amplifier
• AGC_2 Attenuator and Buffer
• IF Digitizing Subsystem
The Receiver Path implements an Automatic Gain Control (AGC), which is required to maintain
good receiver linearity over a wide range of incoming signal levels and prevents clipping of high
level signals.
The IF Digitizing Subsystem performs the following functions:
• Carries out amplification and down conversion of the signal into the second IF.
• Performs IF AGC.
• Converts the second IF analog signal into baseband digital I & Q format.
• Transmits the I & Q baseband data to the DSP for further processing.
• Synthesizes the second LO frequency.
• Synthesizes the Sigma-Delta clock
• Calculates the received signal strength.
THEORY OF OPERATION (TRANSCEIVER)