Ucm Software Activation - Motorola MTM800 User Manual

RETROFITTING the GPS and UCM BOARD
Figure C-3 Location of UCM connector J0450 on the main board

UCM Software activation

After installing the UCM hardware, a software upgrade for the MTM800 ENH will be necessary.
Please refer to the CPS documentation in the Product Information Manual (P/N: 6866537D87) for
more details.
Before use, provision the UCM with E2E Keys and Associations according to your E2E Deployment
Plan. This will require a Key Variable Loader (KVL), and may also require configuration changes to
your system's Key Management Facility (KMF).
Refer to the Dimetra End-to-End Encryption KVL 3000 Plus Key Variable Loader User Guide
(P/N: 6802800U14) for more details. For questions refer to your local Customer Support Centre (see
Appendix B - Service Information).
*
UCM flex
short bending
to main board
*
*
contacts on back side
UCM connector
J0450
C - 3