Remote Head Enhanced - Disassembly - Motorola MTM800 User Manual

7 - 14
5. Snap the back housing into the Enhanced Control Head front housing in the orientation shown
below.
6. Screw the middle screw to the back housing.

Remote Head Enhanced - Disassembly

CAUTION: The terminal must be disconnected from the power supply before commencing
!
any disassembly. The Installation Manual should be referred to for more detailed information
on warnings and safety.
C a u t i o n
To Disassemble the Remote Head Enhanced from the Terminal:
1. Remove the Remote Head Enhanced (PMLN4904_) from the Transceiver by inserting the dis-
mantling tool (Motorola part number 6686119B01) in the recess between the Remote Head
Enhanced and the Transceiver.
To minimize cosmetic damage disassemble from the bottom side (label side).
NOTE:
2. Remove the flex.
Figure 7-9 Reassemble Enhanced Control Head Housing
MAINTENANCE
ZWG0130214-O