Stamina 1764 Owner's Manual page 12

ASSEMBLY INSTRUCTIONS
STEP 10
Attach the STATIONARY HANDLEBAR(12) to the UPRIGHT(17) with BUTTON HEAD BOLTS(M8x1.25x20mm)
(24), LOCK WASHERS(M8)(18), and WASHERS(M8)(72).
STEP 11
Install two AA batteries into the METER(15), the batteries are not included. See page 15 for detailed battery
installation instructions. Plug the CONNECTION WIRE(88) into the METER(15) and push the excess wires
back into the UPRIGHT(17). Attach the METER(15) to the plate on the UPRIGHT(17) with ROUND HEAD
SCREWS(M5x0.8x15mm)(16).
NOTE: Be careful not to damage the wires when attaching the METER(15) to the UPRIGHT(17).
12