Operation Cautions - Canon EOS 5D Service Manual

9. OPERATION CAUTIONS

Cautions
[Imaging sensor]
1. When cleaning the CMOS sensor, use only a
hand blower to blow off dust, etc. Never touch
the CMOS surface with any brush, cloth, or
cleaning agent. Also do not use pressurized
(canned) air or gas to clean the CMOS sensor.
2. If there is a strong light source within
the image area, ghosting might occur at a
symmetrical position or near the light source.
[Image Recording and Playback]
3. While the access lamp is blinking, do not
shake or subject the camera to any physical
shock and do not open the Compact Flash
card slot cover or remove the battery.
4. Do not leave or use the camera near a strong
magnetic field such as a television, audio
speaker, or magnet.
5. Do not leave or use the camera near an
electronic transmission tower, etc., which
emits a strong magnetic field.
6. If a high ISO speed is set, fewer images can be
captured.
7. When an image captured with Adobe RGB
is displayed on the LCD monitor or TV set,
displayed in an sRGB environment, or printed
by an sRGB printer, the image will have low
color saturation.
Remarks
This is to prevent damage to the sensor
As per the design of low-pass filter.
Doing so may damage the stored images,
Compact Flash card, or even the camera itself.
A magnetic or electromagnetic field can
adversely affect the image on the LCD monitor.
It may also prevent proper shooting and image
recording and damage images in the Compact
Flash card.
The electric wave can adversely affect the image
on the LCD monitor. It may also prevent proper
shooting and image recording and damage
images in the Compact Flash card.
As per the design.
(The LCD panel will show the remaining shots
which varies depending on the ISO speed.)
This occurs because the color space is not
suitable.
(Compared to sRGB, Adobe RGB's color
reproduction range is wider. If the image is
displayed via sRGB without profile conversion,
the color reproduction range becomes narrow.)
(To obtain accurate reproduction of Adobe RGB
in an sRGB environment, use image-editing
software like Adobe Photoshop to convert the
profile to sRGB.)
＊There is no problem printing with a CP printer
50
General Information
.