CF Slot Pin Ass y Removal
⑴ Remove three screws and remove the CF Slot
Cover Ass y.
When removing the upper
CAUTION
1
screw it is impossible to place
the screwdriver straight, so be
careful not to strip the screw
head.
Second Ground Plate Removal
⑴ Remove the single screw and remove the Second
Ground Plate.
<Reassembly Notes>
LPU PCB Installation
Dress the DC/DC-LPU connect cable as shown and
bond in place.
Run the Blue/Red cable under the LPU PCB.
Fig. 072 CF Slot Ass y Installation
Fig. 073 Second Ground Plate Removal
Fig. 074 LPU PCB Installation
27
Repair Information
Take care
removing screw
Bond here