Load Resistor Fabricatiion - Canon EOS 5D Service Manual

1.7 Load Resistor Fabricatiion

Things to Prepare
⑴ 35mm Film can
⑵ Banana Plug
⑶ Joint Plug
⑷ Two 0.5Ω 5W Ceramic(Cement) Resistors (p/o CY9-1101-000 TOOL BATTERY PROBE KIT)
Procedures
⑴ Prepare the parts listed in 1)
⑵ Make hole in the film can bottom and cap for the plugs. Install the banana plug and joint
plug in the holes and fix them with their retainers.
⑶ Wire the two ceramic resistors in parallel (A-A', B-B') and solder the ends to the plugs.
⑷ Solder the banana plug.
A
(1 ea.) (Local Purchase)
(1 ea.) (Local Purchase)
(1 ea.) (Local Purchase)
Wire in parallel.
B
Fig. 015
7
Repair Information
Finished Kludge
A'
B'