Camera Direct Printing/Print Ordering (Dpof); Interface; Power Source - Canon EOS 5D Service Manual

４）Customization
With the "Register camera settings" in the Setup menu, you can save the current camera
settings (Table 008) to the Mode Dial's <C> (Camera settings) setting. Even at the <C>
setting, you can still change the shooting functions and menu settings. Any changed
settings can be saved by following the procedure for "Register camera settings" in the Setup
menu.
Shooting Settings
Shooting mode and settings / AF mode / AF point
selection / Metering mode / ISO speed / Drive mode /
Exposure compensation / Flash exposure compensation /
White balance

1.8 Camera direct printing/Print ordering (DPOF)

Other than the added features described in the General Information, the specifications are
the same as with the EOS 20D's.

1.9 Interface

It is the same as the EOS 20D.

1.10 Power source

With a power-saving circuit design, DIGIC II with low power consumption, and a power-
saving CMOS sensor, approx. 800 shots can be taken at 20ºC / 68ºF or approx. 400 shots at
0ºC / 32ºF.
Note 1: Shooting capacity of EOS 5D is less than the EOS20D (approx. 1000 shots), due to EOS 5D's full size 35mm
CMOS sensor, DDR SDRAM and backlit LCD monitor illuminated with 6 LED modules that consume larger
power source.
Note: 2 With a fully-charged BP-511A according to CIPA testing standards.
Bulb exposures can be as long as approx. 1.5 hours with a fully-charged BP-511A battery.
Table 008 Camera setting registration
Quality / Beep / Shoot w/o card / AEB / WB SHIFT/BKT /
Custom WB / Color temp. / Color space / Picture Style
(excluding user defined) / Review time / AF points /
Histogram / Auto power off / Auto rotate / LCD brightness
/ File numbering (method) / Custom Functions (C.Fn)
16
Technical Information
Menu Settings