Connecting The Camera To The Computer To Load Images; Connecting To The Computer - Canon Powershot Pro70 Software Manual

Connecting to the Computer to Load Images
Now that you have finished installing the required software, connect the camera to the
computer and try your hand at uploading images.

Connecting to the Computer

Use the IFC-100PC interface cable to connect the camera to the computer.
• When connecting these devices, always ensure that the computer is shut off and
the camera's mode dial is set to lock.
• Since transferring files between the computer and the camera is relatively power-
intensive, it is advisable to power the camera with an AC power source.
1. Turn off the computer and set the camera's mode dial to lock.
2. Open the camera's terminal cover and connect the IFC-100PC inter-
face cable to the digital terminal.
Mode Dial
Terminal Cover
Digital Terminal
3. Connect the other end of the cable to the computer's serial port
(COM port).
Serial Port
(COM Port)
4. Turn on the computer.
5. Set the camera's mode dial to PC.
IFC-100PC
Interface Cable
IFC-100PC
Interface Cable
13