Obtaining Optional Components - 3Com 3CNJ100 Installation Manual

Obtaining Optional Components

The Network Jack works with the following optional components,
all of which are available from 3Com. Order online at
www.3com.com or by calling 1-877-949-3266.
Component Purpose
Adapter plates For installing pass-through port
connectors of your choice that allow
a direct connection to another
network segment or for connecting
an analog or digital PBX telephone.
Extension ring For ensuring that the Network Jack
is properly mounted to a cubicle;
required if the cubicle opening:
Has a depth of fewer than
I
1.5 inches.
Does not support the NEMA-
I
WD6 standard.
Does not have pre-drilled
I
screw holes for standard
mounting.
Single-port For providing Power Over Ethernet
Ethernet power to locally power a single Network
supply Jack.
Multi-port For providing Power Over Ethernet
Ethernet power to power up to 24 Network Jacks.
supply
Local power For locally powering a single
supply Network Jack; required if your
network does not support Power
Over Ethernet.
Obtaining Optional Components
3C Number(s)
3CNJAP-PA-20
3CNJAP-AV-20
3CNJEXTRING
3CNJPSE
3CNJPSE24
3C10220
3C10222
3CNJPSL
7