3Com 3CNJ100 Installation Manual page 20

Installation Guide
2 Thread the network cable(s) through the empty slot on the
Network Jack.
Wall
To wiring
closet
3 Terminate the end of the network cable(s) with the
connector(s) you purchased separately.
Refer to the connector manufacturer's instructions for
terminating the cable. Be sure to test end-to-end system
functionality and verify that it is working.
4 Snap the connector(s) into the appropriate adapter plate.
Each adapter plate is labeled with the name of a connector's
manufacturer. Be sure to use the adapter plate that matches
the manufacturer of your connector(s).
5 Mount the adapter plate to the Network Jack using the two
adapter plate screws provided.
16