Samsung SCX-6345N User Manual page 49

6 Select your machine from the list and enter a name, user ID, and
PIN (Personal Identification Number) for the machine.
Notes
• For the scanner name, the model name of your machine is
automatically entered, but can be changed.
• You can enter an ID of up to 8 characters. The first character
must be a letter.
• The PIN must be 4 digits.
7 Click Next.
8 Click Finish.
Your machine is added to the Network Scan program and you can
now scan images through the network.
Note
You can change the scanner properties of your machine and the
scan settings from the Samsung Network Scan Manager
window. Click Properties and set the options in each tab.
Registering authorized users
To use scanning to Email, FTP, or SMB, you need to register authorized
users using SyncThru™ Web Service. You can add up to 50 users.
1 Enter your machine's IP address as the URL in a browser and click
Go to access the web site of your machine.
2 Click Machine Settings and User Authentication.
3 Click Add.
4 Select the index number where the corresponding entry will be
stored, from 1 to 50.
5 Enter your name, user ID, password, and e-mail address.
You need to enter the registered user ID and password in the
machine when you start scanning to Email, FTP, SMB from the
control panel.
6 Click Apply.
Setting up an e-mail account
To scan and send an image as an email attachment, you need to set up
network parameters using SyncThru™ Web Service.
1 Enter your machine's IP address as the URL in a browser and click
Go to access the web site of your machine.
2 Click Machine Settings and E-mail Setup.
3 Select IP Address or Host Name.
4 Enter the IP address in dotted decimal notation or a host name.
5 Enter the server port number, from 1 to 65535.
The default port number is 25.
6 Put a check mark in SMTP Requires Authentication to require
authentication.
7 Enter the SMTP server login name and password.
Setting up an FTP server
To use an FTP server, you need to set up parameters for access to FTP
servers using SyncThru™ Web Service.
1 Enter your machine's IP address as the URL in a browser and click
Go to access the web site of your machine.
2 Click Machine Settings and FTP Setup.
3 Click Server List.
4 Click Add.
5 Select the index number, from 1 to 20.
6 Enter a name in Alias for the Setup for the corresponding Server
List entry. This name will be displayed on your machine.
7 Select IP Address or Host Name.
8 Enter the server address in dotted decimal notation or a host name.
9 Enter the server port number, from 1 to 65535.
The default port number is 21.
10 Put a check mark in Anonymous if you want to allow the FTP
server to be accessed by unauthorized persons.
By default, this is unchecked.
11 Enter the login name and password.
12 Enter the location the scanned image will be stored. This is the
location you have entered in the step 6.
13 Click Apply.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB
servers using SyncThru™ Web Service.
1 Enter your machine's IP address as the URL in a browser and click
Go to access the web site of your machine.
2 Click Machine Settings and SMB Setup.
3 Click Server List.
4 Click Add.
5 Select the index number, from 1 to 20.
6 Enter a name in Alias for the Setup for the corresponding Server
List entry. This name will be displayed on your machine.
7 Select IP Address or Host Name.
6.4
<Scanning>