Sending A Fax - Samsung SCX-6345N User Manual

• : selects the option whether the machine send fax of one
Duplex
side of original paper (1Sided), both sides of original paper
(2Sided).
• Resolution: adjusts resolution options.
• Add No: moves the cursor to the next input line.
• : removes the latest entered fax number character.
• : removes the fax numbers within one input line where the
cursor blinks.
• Remove: removes the fax numbers which are below from the
cursor blinks.
• Remove All: removes all the fax numbers in the input area.
Advanced tab
• Original Size: selects the size of original document. Press OK to
update current setting.
• Delay Send: sets the machine to send a fax at a later time when
you will not be present. (Page x.x)
• Priority Send: sends a urgent fax ahead of reserved operations.
(Page x.x)
• Polling: uses when receiver requests the document to be faxed at
sender's absence. Prior to this, sender must store the originals into
the machine for polling function. (Page 5.7)
• Mail Box: allows storing a received fax in the machine memory or
the originals which is ready to poll. You can use a mailbox on the
same machine you are using, or a mailbox set up on a remote
machine. Each mailbox has a corresponding mailbox number,
name and password. (Page 5.8)
• Back: goes to Basic tab.
Image tab
• Original Type: enhances the quality of fax based on the type of
original document being scanned. (Page 5.5)
• Darkness: adjusts the lightness or darkness of the fax. (Page x.x)
• Erase Background: reduces the dark background or paper
pattern such as newspaper originals. (Page x.x)
• Color Mode: selects whether the user sends the fax in mono or
color. (Page x.x)
This part explains how to send a fax, and the special sending methods.

Sending a fax

1 Press Fax from the Main screen.
2 Place the originals face up into the DADF. Or you can use the
scanner glass with a single original document faced down.
3 Adjust the document settings in Image tab.
4 Select Duplex and Resolution options in Basic tab.
Note
If you want to send a fax manually, press On Hook Dial. Then
you can hear a dial tone.
5 When the cursor blinks in the input line, enter the fax number with
number keypad on the control panel. Or use Address on the right
side, if you stored frequently used fax numbers.
Note
To add number, press Add No.
6 Press Start on the control panel.
5.2
<Faxing (Optional)>
Sending a fax