2
Press Admin Setting.
3
Login message appears, enter password (Factory setting: 1111) with
number keypad and press OK.
4
Press Setup tab > Login Setup.
5
Press Change Password.
6
Enter old password and new password.
7
Press OK.
Registering the service center and contact
information
Setting the date and time
The current date and time are shown on the display when your machine
is on and ready to work. All of your faxes will have the date and time
printed on them.
1
Press Machine Setup button in the control panel.
2
Press Admin Setting.
3
Login message appears, enter password with number keypad and
press OK. (Page x.x)
4
Press General tab > Data/Time > Set Date/Time.
5
Enter data and time using the number keypad.
Note
To change the format of data and time, press Date Format
and Time Format.
6
Press OK.
Changing the display language
To change the language that appears on the touch screen, follow these
steps.
1
Press Machine Setup button in the control panel.
2
Press Admin Setting.
3
Login message appears, enter password with number keypad and
press OK. (Page x.x)
4
Press General tab.
5
Press down arrow to switch the screen, press Language.
6
Select language.
7
Press OK.
Setting job timeout
When there is no input, the machine waits the specific time. You can set
the time duration the machine waits.
1
Press Machine Setup button in the control panel.
2
Press Admin Setting.
3
Login message appears, enter password with number keypad and
press OK. (Page x.x)
4
Press General tab.
5
Press Timers.
6
Select System Timeout.
7
Select time using left/right arrows.
8
Press OK.
2.4
<Getting Started>