Getting Started; Setting Up The Hardware; Setting Up The Software - Samsung SCX-6345N User Manual

2

Getting Started

This chapter gives you step-by-step instructions for setting up the
machine's systems.
This chapter includes:
•

Setting up the hardware

•

Setting up the software

• Setting up the network
• Machine's basic settings6
• Understanding keyboard
Setting up the hardware
This part shows the setting steps of the hardware which is explained in
Quick Install Guide. Make sure you read Quick Install Guide and
complete following steps.
1 Select a stable location.
Select a level, stable place with adequate space for air circulation.
Allow extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to
the edge of your desk or table.
2 Unpack the box of the machine and check enclosed items.
3 Remove the tapes which are holding the machine tight.
4 Install the toner cartridge.
5 Load paper.
6 Make sure that all the cables are connected to the machine.
7 Turn the machine on.
Setting up the software
You can install the machine software for printing, copying, faxing, and
scanning. Those software includes drivers, applications, and other user
friendly programs.
Follow the steps for proper use of the machine.
Note
The following procedure is based on the operating system,
Windows XP. The procedure and installation window that
appears to install software may differ depending on the
operating system, the printer feature, or interface in use.
(See the Software Section.)
1 Make sure that the network setup for your machine is completed.
(Page x.x)
Note
Connect the USB cable if you want to use the printer via the
USB cable.
2 All applications should be closed on your computer before
beginning installation.
3 Insert the Printer Software CD-ROM into your CD-ROM drive.
4 The CD-ROM should automatically run, and an installation window
appears. Click Next.
• If necessary, select a language from the drop-down list.
• View User's Guide: Allows you to view the User's Guide. If your
computer doesn't have Adobe Acrobat, click on this option and it
will automatically install Adobe Acrobat Reader for you.
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive and click OK.
2.1
<Getting Started>