communicate with each other through the access point. If
this function is disabled, then both stations can still access
Internet but cannot communicate with each other through
the access point.
If you select Enabled for SSID Hidden, the SSID will be
hidden and cannot be viewed by WLAN clients.
After configuration, click Apply to save the settings.
Note:
You need to reboot HG520 after change the WLAN settings.
3.3 Advanced Configuration
3.3.1 IP Routing
Click IP Routing of Advanced in the navigation bar to display the
IP routing configuration page.
IP routing configuration defines gateways and hops used to route
data traffic. Usually, you do not need to use this feature, as the
previously configured default gateway and LAN IP settings on your
computers should be sufficient.
You may need to define routes if:
your LAN includes two or more networks or subnets, or
you connect to two or more ISP services, or
Huawei Technologies Proprietary
27