access HG520. By default, it is Enabled, all the WAN IP addresses
can access HG520.
Click New to add an access control list.
Description of this configuration page is as follows:
For Interface, select the type of interface.
For IP Address, enter the IP address of the interface.
For Protocol, select the protocol from the drop-down list.
3.3.5 Filters
Click Filters of Advanced in the navigation bar to display the IP
filter configuration page.
Filters are used to deny or allow LAN computers to access
Internet. Through the configuration of IP filters, you can refuse
computers with the specified IP or MAC addresses to access Internet.
You can also block access from Internet to your LAN.
Figure 3-20 Access control list – New
Huawei Technologies Proprietary
33