Chapter 5 Advanced Configuration; Configuring Common Attributes Of Access User; Configuring Ringing Mapping Record - Huawei IAD108A User Manual

User Manual
U-SYS IAD108 Integrated Access Device

Chapter 5 Advanced Configuration

5.1 Configuring Common Attributes of Access
User
The common attributes of access users and SPC users include:
ringing and PSTN port attributes. These attributes can be defined or
take the default values.

5.1.1 Configuring Ringing Mapping Record

I.
Command Description
During the interaction of the MGC and the IAD108, they
negotiates about the ringing type. Ringing mapping is to establish a
corresponding relationship between the ringing type parameters that
the MGC sends to the IAD108 and the ringing tones that the IAD108
provides.
Example:
Add the ringing mapping records to Hong Kong of mapping the
ringing type parameter 22 of the MGC to the ringing tones of the
IAD108. Map the cadence ringing tone to the Hong Kong ringing tone
type 2 and the initial ringing tone to type 18. With such configuration,
when the MGC sends the ringing type parameter 22 to the IAD108, the
IADE(T) will adopt these two ringing tones.
IAD2000(config-if-mg-0)#mgringmode add 22 2 18
II.
Related Commands
Table 5-1 lists the related commands.
5-1
Chapter 5 Advanced
Configuration