Table of Contents
Advertisement
4. In the Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether Service status is Started. If not, click the
Start button.
5. Click OK to close the dialog box. Then, close the Computer
Management window.
Step 4
Con
figure the wireless n
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. In the Network Connections win
Connection to display a shortcut menu, and then choose Properties from
the shortcut menu.
3. In the Wireless Network Connection Properties dialog box, select
Wireless Networks.
4.
Select Use Windows to configur
5. Click View Wireless Networks.
6. Select the wireless network that is configured in Step 2, and then click
Connect in the lower righ
7. In the displayed dialog box, enter the access password t
Step 2, and then click Connect.
After the password is verified, Connected appears on the icon of the wireless network
in the wireless network list, which indicates that the computer
HG530 through a wireless connection.
8. Close the Wireless Network Connection dialog box.
9. In the Wireless Network Connection Properties dialog box, click OK.
5 Configuring the HG530
5.1 Changing the Administrator Password Used
for Logging In to the Web-Based Configuration
Utility
For safety reasons or to make the password easy to remember, you can change the
administrator password for login after logging in to the Web-based configuration
utility.
To change the pa word, do as follows:
ss
Step 1
Log in to the Web-based configuration utility.
Step 2
Choose Tools > System Management in the navigation tree to display the
system management page.
etwork connection on your computer.
dow, right-click Wireless Networ
e my wireless network settings.
t corner of the window.
12
k
hat is preset in
is connected to the
Advertisement
Table of Contents
