request. You need to enter a value in Inactivity Timeout text box. The
default value is 5.
If you select Always On, HG520 will establish the PPP dialing
when it is powered on.
If you select Manual, the PPP dialing will be established
manually.
After the configuration, click Apply to save the settings, or click
Clear to clear the settings.
Note:
You need to reboot HG520 after change the WAN configuration.
3.2.4 LAN Configuration
Click LAN of Basic in the navigation bar to display the LAN
configuration page.
You can change the default LAN IP address and subnet mask.
Ensure that the IP address of your computer and the LAN IP address
are in the same network segment.
Huawei Technologies Proprietary
20