Simple Configuration; Preparing For Configuration; Logging In To The Configuration Interface - Huawei EchoLife HG520 User Manual

III. Connect the power supply
Use the power adapter to connect the POWER interface of
HG520 with the power socket.
IV. Start up the network devices
Switch on HG520 and start up your computer, hub or other
network devices.
V. Configure HG520 through the Web interface
For detailed configuration descriptions, see "Chapter 3 Web
Configuration".

2.2 Simple Configuration

2.2.1 Preparing for Configuration

Before the configuration, make sure that you have made the
following preparations:
1) Connect HG520 and your computer with a network cable.
2) Power on HG520 and start up the computer.
3) Configure the computer to obtain IP address automatically.
Alternatively, configure your computer to be in the same
network segment as HG520. The default IP address of
HG520 is 192.168.1.1.

2.2.2 Logging In to the Configuration Interface

The steps are as follows:
Huawei Technologies Proprietary
7