I Transferring Bank Contents; Memory Operation - Icom IC-R1500 Instruction Manual

4

MEMORY OPERATION

I Transferring bank contents

The bank contents of programmed memory channels can be
cleared or transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
qSelect the desired bank contents to be transferred or
erased from the bank.
➥ Push [MR•SKIP] several times to select memory mode
➥ Push [TS•MODE] then rotate [DIAL] to select the de-
sired memory bank.
• Bank's initial blinks.
➥ Push [TS•MODE] to select the bank then rotate [DIAL]
to select the desired contents.
• Bank's initial stops blinking.
w Push [SET•LOCK] to enter set mode.
ePush [SET•LOCK] or [S.MW•MW] several times until
"bAk" appears.
• The bank's initial for the selected memory channel is displayed.
19
[
rRotate [DIAL] to select the desired bank initial to transfer
or erase.
• Select "-- --" indication when erasing the contents from the bank.
t Push [TS•MODE] to set the bank and exit set mode.
yRepeat steps q to r for transferring or erasing an another
banks contents.