Advertisement
Connecting Your System
HDMI
Plug one end of the included
A
HDMI cable into the HDMI
port on the back of the DVR.
ETHERNET
Plug one end of the included
C
Ethernet cable into the LAN
port on the back of the DVR.
FROM Camera
TO Camera
Connect the ends of the cable
E
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.
3
Plug the other end of the HDMI
B
cable into the back of your
TV or monitor.
Router Not
Included
ETHERNET
Plug the other end of the Ethernet
D
cable into a numbered port on
the back of your router.
Make sure you twist and
lock BNC connectors!
Connect the BNC connector of
F
the video/power cable labeled
TO DVR ONLY to an open
video input on the DVR.
To ensure all cameras are
G
functioning properly, please
test each one locally before
installing them.
Camera Power
Adapter
Power
splitter
Surge
Protector not
included
Connect the power splitter to
I
the camera power adapter and
plug the adapter into a surge
protector or Uninterruptible
Power Supply (UPS).
Surge
Protector not
included
Plug the DVR power adapter into a
K
surge protector or Uninterruptible
Power Supply (UPS).
Power cable
Power splitter
connectors
connectors
Connect the red female power
H
leads of the video/power cables
to the male power splitter ends.
Connect the DVR power adapter
J
to the Power Input on the rear of
the DVR.
Ensure you are using
the correct power adapter.
The DVR power adapter
is labeled TO DVR ONLY
The Camera power adapter
is labeled TO CAMERA ONLY
4
Advertisement
