Connecting Your System - Night Owl THD Series Quick Setup Manual

Connecting Your System

HDMI
Plug included HDMI cable into
1
the HDMI port on the back of
the DVR.
USB
Plug the USB mouse into the USB
3
port on the back of the DVR.
ETHERNET
Plug the other end of the
5
Ethernet cable into a numbered
port on the back of the router.
3
NOTE:
view cameras, TV/Monitor must be tuned to
the same Input the HDMI is plugged into.
Plug the other end of the
2
HDMI cable into the back
of the TV or Monitor.
ETHERNET
Plug the included Ethernet
4
cable into the LAN port on
the back of the DVR.
(Router Not
Included)
DISCLAIMER:
STOP:
each camera locally to confirm they
function properly.
Monitor is required for initial setup. To
Camera/cable quantities may vary.
BEFORE installing, test