Table of Contents
Advertisement
Alarm Settings
Alarm Transmission Options
Parameter
Description
Programming
Options
Parameter
Description
Programming
Options
Values
4-20
Yellow Alarm Send
Determines whether the DBS sends a yellow alarm signal to the
CO.
Master cabinet: FF1 9# 4# 4# 1# 7# (0-1)#
Slave cabinet: FF1 9# 4# 5# 1# 7# (0-1)#
0=No
1=Yes
Red Alarm Detection
The default value for this parameter is determined by network
specifications. It should
If a red alarm occurs, the "CFA" LED on the ISDN card lights.
Also, if the "Red Alm Relay" parameter (page 4-25) is turned on,
the alarm relay on the ISDN MDF card closes.
Note: For changes to this parameter to take effect, the system
must be powered down, then back up again.
Master cabinet: FF1 9# 4# 4# 2#1# (0-5)#
Slave cabinet: FF1 9# 4# 5# 2# 1# (0-5)#
0-5
0=4
1=6
2=8
3=10
4=12
5=14
DBS-EX23-530
Programming Reference
not
be changed.
Revised April 2000
Advertisement
Table of Contents
