Panasonic T-SMART DBS-EX23-530 Reference Manual page 47

Quick-Start Programming
4. Assign the sync sources (pages 4-4 to 4-6).
5. Power the system OFF then ON.
6. Specify the number of ISDN channels (page 4-16) per cabinet.
Revised April 2000
Addresses Sync Source 1: FF1 9# 4# 1# 2# (1-3)#
Sync Source 2: FF1 9# 4# 1# 3# (0-3)#
Sync Source 3: FF1 9# 4# 1# 4# (0-3)#
Options Sync Source 1: 1=ISDN of the master cabinet
Sync Source 2: 0=None
Sync Source 3: 0=None
Examples In most cases, set the sync sources as follows:
ISDN in a single cabinet or ISDN in a master cabinet:
ISDN in a slave cabinet
ISDNs in the master and slave
Addresses Master cabinet: FF1 9# 4# 4# 1# 2# (0-23)#
Slave cabinet: FF1 9# 4# 5# 1# 2# (0-23)#
(0)
Options 0-23
DBS-EX23-530
Programming Initial ISDN Options
2=ISDN of the slave cabinet
3=Free run (internal clocking)
1=ISDN of the master cabinet
2=ISDN of the slave cabinet
3=Free run (internal clocking)
1=ISDN of the master cabinet
2=ISDN of the slave cabinet
3=Free run (internal clocking)
Source 1=1 (ISDN of the master cabinet)
Source 2=3 (Free run)
Source 3=0 (None)
Source 1=2 (ISDN of the slave cabinet)
Source 2=3 (Free run)
Source 3=0 (None)
Source 1=1 (ISDN of the master cabinet)
Source 2=2 (ISDN of the slave cabinet)
Source 3=3 (Free run)
3-5