Table of Contents
Advertisement
Installation
9. Connect the cable attached to CN3 on the MDF card to CN3 on the ISDN
10. Using an RJ48 cable, connect CN1 on the MDF card to the CSU (Figure
Figure 2-7. RJ48 pinouts, CN1 connector
Revised April 2000
card (Figure 2-8).
2-8). The following illustration shows CN1 pinouts.
RJ48 Pin Designations
Pins
1 and 2
3 and 6
4 and 5
7 and 8
DBS-EX23-530
Installation Procedures
Designation
Receive from CSU
No connections
Transmit from the
DBS
Frame ground
2-19
Advertisement
Table of Contents
