Attaching The Usb Dongles To The Base Station; Charging The Spare Battery On The Base Station - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP

Attaching the USB Dongles to the Base Station

Attaching the
USB Dongles to
the Base Station
NOTE
Charging the
Spare Battery on
the Base Station
44
VX 680 I
NSTALLATION
With the VX 680 mounted on the Base Station, use the USB dongles to connect to
external peripherals. Only one Modem Dongle and one Serial Dongle can be
connected to the Base Station. A second Modem Dongle or a second Serial
Dongle will be ignored by the terminal.
The full-featured Base Station has USB ports for two external dongles. The
standard Base Station does not have USB ports.
1
Insert the USB dongle into the USB port located at the back of the Base
Station.
Figure 32 Inserting External Dongle Into USB Port
2
After inserting the external dongle into the USB port, place the VX 680
terminal onto the Base Station (see
3
Connect the peripheral to the external dongle.
The full-featured Base Station can charge the VX 680 terminal while charging an
extra battery pack.
1
Connect the Base Station to a power source (see
Station)
G
UIDE
Powering Up the Base
Powering Up the Base
Station).